1968 Husqvarna 500CR
Specifications and workshop reference information for the 1968 Husqvarna 500CR, including engine, chassis, service data and setup details.
Note: Specs are compiled from factory data, manuals and owner feedback. Bikes vary — if yours is different, jump into the forum and share it.
General Specifications
| Engine Type | Air-cooled, 2-stroke, single-cylinder, reed valve |
| Displacement | 488 cc |
| Bore × Stroke | 86 mm × 84 mm |
| Compression Ratio | 9.5:1 |
| Maximum Power | Approx. 46–50 hp |
| Maximum Torque | N/A |
| Carburetor | Mikuni VM40–44 |
| Lubrication | Premix |
| Fuel Mix Ratio | 32:1 (typical) |
| Ignition | Motoplat internal rotor |
| Spark Plug | N/A |
| Spark Plug Gap | N/A |
Transmission
| Transmission Type | 4-speed manual |
| Clutch | Wet multi-plate |
| Primary Reduction | N/A |
| Final Reduction | N/A |
| Overall Reduction | N/A |
Dimensions
| Overall Length | N/A |
| Overall Width | N/A |
| Overall Height | N/A |
| Wheelbase | N/A |
| Ground Clearance | N/A |
| Fuel Tank Capacity | 10 L |
Chassis
| Frame Type | Steel single cradle |
| Caster Angle | N/A |
| Trail | N/A |
| Front Suspension | 40 mm telescopic fork |
| Rear Suspension | Twin shock (ITC system) |
| Front Suspension Travel | 300 mm |
| Rear Suspension Travel | 310 mm |
Brakes & Wheels
| Front Tire | 3.00 × 21 |
| Rear Tire | 5.00 × 17 |
| Front Brake | Drum |
| Rear Brake | Drum |
500cc Other Specs
Community
VMX Owners Forum
Discuss vintage motocross bikes, restorations, tuning and riding.
